5 different resolutions: 0.5um,1.5um,2.5um,8um,20um Detection ranges are 30mm,50mm,85mm,120mm,and 250mm respectively. Response times are 200??, 500??, 1ms, and 2ms respectively
Detection accuracy reaches ??0.1% F.S Small light spot Dual communication,three switch values,dual analog balues and other communication methods Laser LED,visible light,reflective grade is divided into 2 levels
| Model NO. | HF.CGQ-JGWY-50NP-S |
|---|---|
| Production Process | Integration |
| Material | Plastic |
| IP Rating | IP67 |
| Certification | ISO |
| Customized | Customized |
| Transport Package | White Box |
| Specification | 140g |
| Trademark | Hongfei |
| Origin | China |
| Model | HF.CGQ-JGWY-50NP-S |
|---|---|
| High-Functional Model | 50mm |
| Measurement Center Distance | 50±10mm |
| Measurement Range | CMOS Image Sensor |
| Light Receiving Part | 1.5um |
| Resolution | ±0.1% F.S |
| Temperature Characteristics | ±0.08% F.S |
| Beam Source | Red semiconductor laser level 2 [JIS/IEC/GB/KS/FDA Laser Notice No.50/GB] Maximum output: 0.39W, Peak wavelength of floodlight: 655nm |
| Beam Diameter | 0.5*1m |
| Supply Power & Voltage | 24VDC ±10% Impulse (P-P) 0.5V (P-P) |
| Current Consumption | 100mA Below |
| Response Time | 200μs, 500μs, 1ms, 2ms |
| Voltage Output Range | 0~10.5V (Normal), 11V (Alarms) Output impedance: 100Ω |
| Current Output Range | 3.2~20.8mA (Normal), 21.6mA (Alarms) Load impedance: Below 300Ω |
| Output Operation | Open when the output is ON |
| Short-Circuit Protection | Equipped (automatic recovery type) |
| NP Switching Input | When connected to OV: NPN open collector output operates. When the power supply is 24V DC connected: PNP open collector output action |
| Timing Input | When NPN action is set: Action when connected to OV or action during connection (varies depending on the setting). When PNP action is set: Action when external power supply+ is connected or action during connection (varies depending on the setting) |
| Multiple Input | Perform zero adjustment, reset, memory switching, teaching, saving, and laser control according to the input time. When NPN action is set: according to the time of connecting 0V. When setting PNP action: according to the time when external power supply+ is connected |
| Communication Interface (High-Function Type) | RS-422 Or RS-485 Baud rate: 9,600/19,200/38,400/115,200bps. The data length is 8 bits, the end bit length is 1 bit, no parity check, yes BCC, data differentiation: CR |
| Laser Light Warning | Green light-emitting diode lights up when the laser is emitting light |
| Alarm Indicator | Insufficient light from the orange light-emitting diode prevents measurement |
| Output Indicator | The yellow light-emitting diode (number of display lights: 3) lights up when the output is activated |
| Digital Display Part | Red LED symbol and 5-digit display |
| Pollution Degree | Below 2,000m |
| Protective Structure | (except connection part) |
| Ambient Temperature | (be careful not to condense or freeze) when storing: -20 ~ +60°C |
| Ambient Humidity | 35~85%RH: 35~85%RH storage: 35~85%RH |
| Ambient Illumination | 3,000Lux or less (light-receiving surface illumination with incandescent lamp) |
| Insulation Resistance | 20MΩ or more at DC250V Megger (between all terminals and shell) |
| Withstand Voltage | AC1,000V 1 minute (between all terminals and case) |
| Vibration Resistant | Endurance frequency 10~55Hz (cycle 1 minute) Double amplitude 1.5mm in X, Y and Z directions for 2 hours each |
| Shock Proof | 500m/s² 3 times in X, Y, Z directions |
| Tightening Torque | Below 0.8N·m |
| Shell Material | Enclosure: PBT, Front Cover: Acrylic, Cable: PVC |
