Ensure long-term correct and complete assembly
The device is easy to use: installation and operation can be completed in a few steps without software
The measurement is not affected by distance, allowing for high tolerances in the placement of components
Resist external light interference, no need to shield external light or use external lighting
On-line quality control checks ensure proper assembly of parts
Quick setup without software
It is not affected by color, and is not sensitive to external light, and it is widely used
Software-supported fault analysis with profile visualization and measured values
Up to 10 optional contours for greater flexibility
PMD profile sensors are designed for error prevention. The PMD profile sensor monitors the assembly, positioning, selection and manufacturing of the object. In addition, the PMD profile sensor can accurately detect the object under test, such as whether the screw is fully fastened or whether the fixture system is locked. For this purpose, the PMD profile sensor projects a straight laser line to determine the profile of the object to be detected.
| Light Type | Red light |
|---|---|
| Communication Interface | IO-Link |
| Laser Protection | Class 1 |
| Dimensions [mm] | 88 x 65 x 28.5 |
| Operating Voltage [V] | 10... 30 DC |
| Current Loss [mA] | < 200 |
| Current Loss Reference Voltage [V] | 10 |
| Protection Class | III |
| Inverting Protection | Yes |
| Boot Delay Time [s] | 2 |
| Wavelength [nm] | 650 |
| Digit | The input number is 1 |
| Electrical Design | PNP/NPN; (Configurable parameters) |
| Digital Output Quantity | 2 |
| Output Function | 2 x normally open/normally closed; (Configurable parameters) |
| Maximum Current Load [mA] | 100 per output |
| Short-Circuit Protection Type | Pulse |
| Overload Protection | Yes |
| Measuring Distance (Z direction) [mm] | 150... 300 |
| Measuring Range Width (X direction) at Minimum Measuring Distance [mm] | 45; (Distance = 150mm) |
| Measuring Range Width (X direction) at Maximum Measuring Distance [mm] | 90; (Distance = 300mm) |
| Measurement Frequency [Hz] | 5 |
| Resolution of Measurement | 200 m in the Z direction 250 m in X direction |
| Precision | Z direction 500 m X direction 500 m |
| Background (White 90% Reflection) | External light of the object < 20 klx |
| Communication Interface | IO-Link |
| Pass Type | COM3 (230,4 kBaud) |
| IO-Link Revision | 1.1 |
| SDCI Standard | IEC 61131-9 |
| Shape | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO Mode | Yes |
| Required Mater Port Type | A |
| Minimum Processing Cycle [ms] | 2.3 |
| Weight [g] | 534.5 |
| Dimensions [mm] | 88 x 65 x 28.5 |
| Raw Material | Shell: die-cast zinc; PPSU; ABS; PMMA; PBT / PC; EPDM; Front lens: PMMA |
| Measure the Distance (Z direction) of Light | 150 mm 50 x 1 mm 300 mm 100 x 1 mm |
| Value For | External light of the object < 20 klx Constant environmental conditions 23 / 960 hPa |
| Minimum Startup Time (Min.) | 10 |
